All posts by dannik

GlobeCore GmbH invites specialists of the power industry and everyone interested in innovations in electrical power industry to take part in our seminar on “Purification and regeneration of industrial oils”.

The event will take place in Oldenburg (Germany) on September 27 at Edewechter Landstrasse, 173. The program of the seminar covers the problems of industrial oil aging and importance of oil regeneration. In the practical part of the seminar our engineer will demonstrate transformer oil regeneration on CMM-R unit.

If you would like to participate, you need to apply before September 1, 2017, by sending an email to [email protected].

May 13, 2017, another GlobeCore plant was successfully put into operation.

In Lahore (Pakistan), a CMM-4/7 unit serviced the power transformers through heating, drying, cleaning, degassing and nitriding of the insulating oil. This equipment can provide ISO 4406 cleanliness class – / 14/12 of industrial oil. It also achieves moisture content  by weight below  5 g / t, and the volumetric gas content 0.1%.

GlobeCore transformer oil purification systems extend the service life of power transformers and reduce financial costs. More detailed technical characteristics of this equipment can be found here.

May 3-4, 2017 in Quito (Ecuador), GlobeCore presented a seminar on cleaning and regeneration of transformer oil.

The event was attended by representatives of companies from electricity sector of Ecuador, Peru, Bolivia, Argentina, Colombia, Costa Rica, El Salvador, and other countries.

On the first day the participants were presented with our company’s achievements in transformer oil regeneration. An example of oil regeneration was shown on a real energized transformer with the CMM-12P regeneration unit. This equipment was commissioned in August  last year and successfully performs the required tasks. The presentation was discussed, and all questions answered.

The second day of the seminar was devoted to technical and commercial issues of possible cooperation on an individual basis.

GlobeCore is very grateful to all the guests for attending and showing their interest in the seminar, and Tcontrol S.A. – for their help in organizing and conducting the event.

Filter for compressor. Compressors are designed to compress air. They have special filters, which protect both the mechanisms of compressors and the gas used in the systems. The filter is selected according to the type of compressor. Let’s look at the most common types of filters.

Air filters are used to protect the compressor air chamber from dust. Generally, the rotary-screw compressor has a two-stage purification system which, first captures large particles of contaminants (coarse filter), and then small particles (fine filtration).

A filter for compressor oil purifies oil, which flows into the compressor chamber, removing dust.

Air-oil separators separate oil from air after passing through the compressor chamber. They do not directly affect the operation of compressors, but are still very important. Air-oil separators save oil and clean the air produced by the compressor.

Special attention should be paid to waste compressor oil. During operation the compressor oil falls under the influence of a number of negative factors (high temperatures, contamination by various impurities and gases). As a result, the oil loses some of its operational properties, and must either be replaced or regenerated to its original condition.

GlobeCore developed an oil treatment unit for compressor oils that reduces the water content  to 10 ppm and air content to 0.25% respectively, removes solid particles, extends the life of oil, increases the service life of compressors and reduces downtime  and amount of maintenance and repair work.