{"id":474,"date":"2016-03-04T13:12:53","date_gmt":"2016-03-04T13:12:53","guid":{"rendered":"http:\/\/oilfiltration.globecore.com\/?p=474"},"modified":"2020-04-14T10:10:24","modified_gmt":"2020-04-14T10:10:24","slug":"top-sales-expressed-interest-best-selling-product-2015-year-globecore-high-vacuum-purifier-uvm-47","status":"publish","type":"post","link":"https:\/\/oilfiltration.globecore.com\/top-sales-expressed-interest-best-selling-product-2015-year-globecore-high-vacuum-purifier-uvm-47\/","title":{"rendered":"TOP OF SALES! The most expressed interest and the best-selling product in the 2015 year was: GlobeCore High Vacuum Purifier CMM 4\/7"},"content":{"rendered":"

TRANSFORMER OIL PURIFIER CMM-4\/7<\/strong><\/p>\n

Capacity m3\/h:<\/strong>
\n\u2022 4 m3\/hour (degassing, drying and filtration)
\n\u2022 7 m3\/hour (heating and filtration<\/p>\n

\n

Photo 1 of GlobeCore\u2019s CMM-4\/7 (stationary on legs)<\/em><\/p>\n

USE<\/strong><\/p>\n

\u2022 This oil processing system is designed for degassing, cleaning from mechanical impurities, drying and hating of the oil for power transformers with voltage up to 1150 kV.
\n\u2022 This unit can also be used for heating of oil containing equipment with hot oil, vacuum drying of transformers and vacuum processing.<\/p>\n

FEATURES<\/strong><\/p>\n

    \n
  1. \u00a0Reduction of Gas content from fully saturated with air (10 to 12% by volume) to less than 0.1 %<\/li>\n
  2. \u00a0Removal of Particulate Matter to 5 micron<\/li>\n
  3. Removal of Water from 100 ppm down to 10 ppm and from 50 ppm to 5 ppm in a single pass and down to 3 ppm after 3 passes (ASTM method D-1533).<\/li>\n
  4. Improvement in dielectric strength up to 80 kV\"UVM-16(2)\"<\/li>\n<\/ol>\n

    Photo 2 of GlobeCore\u2019s CMM-4\/7mobile on the trailer)<\/em><\/p>\n

    VERSION<\/strong><\/p>\n

      \n
    • standard (on legs);<\/li>\n
    • on wheels;<\/li>\n
    • mobile (on the trailer with speed not more than 80 km \/ h)<\/li>\n<\/ul>\n

      CONTROL<\/strong><\/p>\n

      \u2022 Touch panel
      \n\u2022 Manual mode
      \n\u2022 Semi-automatic mode
      \n\u2022 Automatic with the advanced control and gauging instruments<\/p>\n

      IMPORTANCE OF USE<\/strong><\/p>\n

      Transformer oil is used as an insulator, fills the cavity inside of transformers tank protecting hard paper insulation from moisture and air. Aslo it\u2019s coolant in transformers. Transformer oil must remain stable at high temperatures for an extended period. In order to stop the aging of insulation in the transformer, one shall keep oil in the best condition. Our equipment will help you to keep the oil in good condition. Timely servicing of transformers by GlobeCore oil filtration equipment will prolong its service life up to 15 years.<\/p>\n

      VIDEO <\/strong>
      \nConnection CMM-4\/7 to transformer<\/strong><\/p>\n

      HOW TO SAFE THE OIL IN TRANSFORMER<\/strong><\/p>\n

      \u2022 Monitoring of the condition of the oil
      \n\u2022 Repair the oil leak
      \n\u2022 To reduce the moisture content of less than 10 ppm start using CMM purifier of \u00abGlobeCore
      \n\u2022 Do not refill moisturizing oil pre-open container
      \n\u2022 Start drying of oils as soon as the moisture content will rise to 20 ppm or breakdown voltage drops below 50 kW
      \n\u2022 To monitor the condition of the oil acid and conduct oil regeneration before it reaches a critical level of 0.2 KOH \/ g using the oil regeneration CMM-R of \u00abGlobeCore\u00bb.
      \n\n\n