Bitumen emulsion sprayer RBEM-0,2

GlobeCore Bitumen Emulsion Sprayer unit is designed to diffuse hot bitumen emulsion for road construction work.  The process of bitumen emulsion spraying is achieved by means of rotary gear pump. The tank for bitumen emulsion storage can be heated by means of burner. The design of the sprayer provides an operation in an environment with an ambient temperature of + 10 ° C to + 40 ° C and a relative humidity of 98% at 25 ° C.

GENERAL VIEW

Photo 1 General view

 APPLICATION

• Road surfacing
• Earth surfacing
• For road patching
• Sealing of cracks
• Asphalt construction work

TECHNICAL DESCRIPTION

Properties		Value
1. Spray nozzle
	– nozzle type	hollow cone
	– height from earth, mm	380
	– length of flexible hose, m	6
2. Full value, м³		0,2
3. Work value,  m³		0,18
4. Emulsion pump capacity, l/min		34,2
5. Internal combustion engine
	– output, kW
	– rotation, r/min	3600
6. Dimension, mm
	– length in work position	2160
	– length with raised dumper	3225
	– height with raised down housing	1110
	– width with raised up housing	1471
	– width	990
7.Mass, kg		250
8.Mass if filled , kg		450

COMPONENT PARTS

1 – Tank with volume 0,2m ³; 2 – Frame; 3 – Protective cover; 4 – Connecting device; 5 – The internal combustion engine a; 6 – Reducer; 7 – Bitumen pump ; 8 – Check valve; 9 – Tank  for washing  of systems; 10 – Rod, 11 – Box for storing of hoses

FUNCTION OF PUMPING UNIT

1. Tank filling.
2. Injection ofemulsiononthe nozzle.
3. Recycling ofasphalt emulsion.
4. System flushing.

SOUND LEVELS

Noise levels set in accordance with ISO 3644:

• Sound Power: 100.6 dB (A)
• Equivalent sound pressure level at the workplace: 85.8 dB (A)
• The level of increase in sound pressure in the workplace <135 dB

 FILLING OF TANK WITH EMULSION

Filling the emulsion can be carried out in the following manner: through the filler hole in the tank

EMULSION LEVEL CONTROL

Level control of  emulsion is  made visually through the filler opening installed on the top of the container.

DISCHARGE OF EMULSION

 On the Camlock connection, disconnect the rod and discharge the emulsion by means of the pumping unit. Do not dispose of unused emulsion into the environment, collect it and send it in an incinerator.

TEMPERATURE EMULSION CONTROL

Control at the moment achieved temperature of the emulsion is carried out before filling by means of visual thermometer. If you need another temperature, use preliminary heated or cold emulsion.

 START, STOP, EMERGENCY STARTING THE INTERNAL ENGINE

To start, stop, emergency start of the internal combustion engine, carefully read the attached instructions for use and maintenance of the internal combustion engine.

NOZZLE USE

Use the nozzle as shown on the following figure.

NOZZLE APPLICATION

 After starting the engine, perform the following steps:

• The choice of emulsion installation cranes as per Chapter 7
• Turn the handle on the nozzle in position 1, wherein the emulsion starts to flow

END OF SPRAYING

• Close the injector valve
• Open the tap under flushing tank  to perform cleaning

WARRANTY

GlobeCore warrants the machinery supplied under this specification against defects in material and workmanship under normal use and service for a period of 12 months from the date of commissioning.